Rode RX-CAM Camera-Mount Digital Wireless Receiver (2.4 GHz)
Rode RX-CAM Camera-Mount Digital Wireless Receiver (2.4 GHz) - Image 2
Rode RX-CAM Camera-Mount Digital Wireless Receiver (2.4 GHz) - Image 3
Rode RX-CAM Camera-Mount Digital Wireless Receiver (2.4 GHz) - Image 4
Rode RX-CAM Camera-Mount Digital Wireless Receiver (2.4 GHz) - Image 5
Rode RX-CAM Camera-Mount Digital Wireless Receiver (2.4 GHz) - Image 6
Rode RX-CAM Camera-Mount Digital Wireless Receiver (2.4 GHz) - Image 7

Rode RX-CAM Camera-Mount Digital Wireless Receiver (2.4 GHz)

The Rode RX-CAM is a camera-mount wireless receiver compatible with RODELink digital wireless systems for videographers, podcasters, and mobile journalists.

WHERE TO BUY
Speak To An Expert
SKU RODELINK RX-CAM Categories , , , Tag Brand:

Specs

Wireless Technology Digital 2.4 GHz
Diversity Frequency
RF Channel Scanning Auto-Scan
Max Operating Range 330′ / 100.6 m (Line of Sight)
Max Transmitters per Band 8
Latency 4 ms (Maximum)
Receiver
Receiver Type Camera-Mount (Bag Suitable)
Mounting Options Belt Clip, Shoe-Mount (with Included Hardware)
Antenna Internal
Number of Audio Channels 1
Audio I/O 1 x 1/8″ / 3.5 mm TRS Female Unbalanced Output (Lockable)
Audio Output Level 0 dBV (Max)
Frequency Response 35 Hz to 22 kHz
USB/Lightning Connectivity 1 x Micro-USB (Bus Power)
Impedance 1/8″ / 3.5 mm Output:
300 Ohms (Unbalanced)
Power Requirements Battery, Bus Power (USB)
Battery Type 2 x AA (Not Included)
Approx. Battery Life 30 Hours (Alkaline)
Display & Indicators 1 x OLED (Battery Status, Channel, Mute, Peak)
Housing Plastic
Dimensions 2.6 x 4.4 x 2″ / 65 x 111 x 52 mm
Weight 6.7 oz / 190 g

Easy to use and fast to set up, the RX-CAM mounts on the shoe of your DSLR/mirrorless camera without adding much weight. Plug it into the 3.5mm mic input of your camera using the the included output cable. Additionally, the receiver can be clipped on a belt or mounted using the 3/8″-16 thread at the bottom.

The RX-CAM runs up to 30 hours on two AA batteries and can be powered via USB with a wall power source or a portable battery, while in operation.

Receiver with OLED Display

  • The OLED display shows critical information for the receiver as well as the transmitter, including battery status, signal level, mute status, and channel selection for both units.
  • The unit features a high-output level with 0 dB, -10 dB, or -20 dB gain adjustment, which lets you turn down the camera gain for cleaner recordings with less hiss.
  • Lightweight (at 6.7 oz), the RX-CAM features a detachable shoemount with a rounded base that lets you conveniently angle the unit on top of your camera.
  • The receiver’s shoemount adapter can be swapped, allowing it to be belt clipped, mounted on cameras and tripods, or used in an audio bag.
  • The included cable connects the receiver’s output to the 3.5mm audio input of any DSLR or mirrorless camera.
  • Alternatively, the VXLR 3.5mm to XLR adapter (available separately) allows you plug your system into the XLR input of a camcorder or recording device.

Simple and Flexible Operation

  • The RX-CAM uses an intuitive, single-button interface for frequently used basic functions including power and muting.
  • Additional buttons offer more advanced controls—without elaborate menu diving—over audio levels, additional pairing, and channel selection (if you’re using multiple systems).

Other Features

  • Up to 30 hours on two AA batteries.
  • Also operates powered via USB with a wall power source or a portable battery.
  • 4 ms maximum latency.
  • 128-bit encryption for security.
  • Designed and made in Australia.

Clean and Reliable Sound

  • RODELink employs Series II 2.4 GHz digital transmission, which constantly monitors and hops between frequencies to maintain a clean transmission, at a range of up to 330’.
  • To ensure clear communication, the system sends the audio on two separate frequencies (frequency diversity) and uses the cleanest signal.
  • The system transmits a strong signal at the selected frequency to overcome interference even in busy 2.4 GHz (Wi-Fi) environments. For optimal performance, users are encouraged to maintain as direct a line of sight as possible between the transmitter and receiver.
Note: Each RODELink system creates a wireless peer-to-peer connection allowing the transmitter and the receiver to operate as a pair. This means that the transmitter can transmit audio to only one receiver at a time. Conversely, the receiver can only receive audio from one transmitter at a time.

Brand

Rode

Related products

Scroll to Top